A Search Service for Abbreviation / Long Form

■ Related PubMed/MEDLINE Info.

[Related PubMed/MEDLINE]
Total Number of Papers: 433
[Display Entries]
100 entries :
      (Publication year, Descending)
100 entries :
      (Publication year, Ascending)
all entries
[Entries Per Page]
 per page
Page Control
Page: of
Abbreviation : EC
Long Form : ethyl cellulose
No. Year Title Co-occurring Abbreviation
1982 Release kinetics of sparingly soluble drugs from ethyl cellulose-walled microcapsules: salicylamide microcapsules. ---
1988 Design and release kinetic pattern evaluation of indomethacin microspheres intended for oral administration. ---
1988 Insulin controlled-release microcapsules to prolong the hypoglycemic effect in diabetic rats. EVA, PLA
1988 Nuclear magnetic resonance study of an ethyl cellulose sustained-release delivery system. I: Effect of casting solvent on hydration properties. HF, PEG
1988 Nuclear magnetic resonance study of an ethyl cellulose sustained-release delivery system. II: Release rate behavior of tetracycline. OD, PEG, PMR, TC
1992 Effect of cervical coating of ethyl cellulose polymer and metacrylic acid copolymer on the radicular penetration of hydrogen peroxide during bleaching. MAC
1992 Evaluation of enteric coated tablet sensitive to pancreatic lipase. I. In vitro disintegration test. JP-2-GL, SMZ, TL, TO
1992 Utility of mixture of commercially available polymers as constituents of sustained-release microcapsules containing cefadroxil or theophylline. AS-HG
1993 A novel fine granule system for masking bitter taste. HPMC, L-HPC, SPFX
10  1993 Application of the solid dispersion method to the controlled release of medicine. IV. Precise control of the release rate of a water soluble medicine by using the solid dispersion method applying the difference in the molecular weight of a polymer. HPC, OXP
11  1993 Design and preparation of ethyl cellulose microcapsules of gadopentetate dimeglumine for neutron-capture therapy using the Wurster process. PVP
12  1993 Evaluation of enteric coated tablet sensitive to pancreatic lipase. II. In vivo evaluation. MRTaf, SMZ, TL, TO
13  1994 A biopharmaceutic approach in designing a controlled release tablet of sodium monofluorophosphate: 1. In vitro and in vivo studies in beagle dogs. CRT
14  1994 Development of a novel drug release system, time-controlled explosion system (TES). I. Concept and design. L-HPC, TES
15  1994 Influence of pH and plasticizers on drug release from ethylcellulose pseudolatex coated pellets. ---
16  1994 Properties of free films prepared from aqueous polymers by a spraying technique. CAP, HPMCAS
17  1994 Sustained release of phenytoin following the oral administration of phenytoin sodium/ethylcellulose microcapsules in human subjects and rabbits. ---
18  1995 Preparation and evaluation of a time-controlled release capsule made of ethylcellulose for colon delivery of drugs. L-HPC
19  1996 Cellulose acetate trimellitate ethylcellulose blends for non-steroidal anti-inflammatory drug (NSAID) microspheres. CAT, Ket, NSAID
20  1996 Preparation of controlled release granules of TA-5707F using enteric polymers and ethylcellulose, and their in vivo evaluation. HPMCAS
21  1996 Solvent and plasticizer influences on ethylcellulose-microcapsules. DFNa
22  1997 Comparison of vitamin C bioavailability after multiple or single oral dosing of different formulations in sheep. AA, AUC, AUCabove, RC, SA, SC
23  1997 The effect of intestinal bacteria adherence on drug diffusion through solid films under stationary conditions. SA
24  1998 Calculation of the dimensions of drug-polymer devices based on diffusion parameters. ATBC, DBS
25  1998 Development of diclofenac sodium controlled release solid dispersion powders and capsules by freeze drying technique using ethylcellulose and chitosan as carriers. CS, DS
26  1998 Development of new chitosan-cellulose multicore microparticles for controlled drug delivery. CAB, CS, FITC-BSA, SD
27  1998 Effect of fractal dimension on drug permeation through porous ethylcellulose films. DEP
28  1998 Evaluation of intestinal pressure-controlled colon delivery capsule containing caffeine as a model drug in human volunteers. PCDC
29  1998 Evaluation of soluble Bioadhesive Ophthalmic Drug Inserts (BODI) for prolonged release of gentamicin: lachrymal pharmacokinetics and ocular tolerance. BODI, CAP, GS, HPC, HPMC
30  1998 New preparation method of intestinal pressure-controlled colon delivery capsules by coating machine and evaluation in beagle dogs. FL, PCDCs, PEG
31  1998 Preparation and evaluation of micro-porous ethylcellulose capsule as oral sustained-release preparation of theophylline. PVA
32  1998 [Design and application of oral sustained-release anticancer drug--a new oral dosage form of cisplatin]. BCM
33  1998 [Ulcerative colitis--colon delivery of 5-aminosalicylic acid]. PCDC
34  1999 Aqueous ethyl cellulose dispersions containing plasticizers of different water solubility and hydroxypropyl methylcellulose as coating material for diffusion pellets. I. Drug release rates from coated pellets. DBP, DBS, DEP, HPMC, TEC
35  1999 Bead compacts. II. Evaluation of rapidly disintegrating nonsegregating compressed bead formulations. MCC, PEG, PEO
36  1999 Development of terbutaline sulfate sustained-release coated pellets. TS
37  1999 Diffusion-controlled drug delivery systems: calculation of the required composition to achieve desired release profiles. ATBC, ATEC, DBP, DBS, DEP, TBC
38  1999 Effects of cellulose derivatives and additives in the spray-drying preparation of acetaminophen delivery systems. CA, DBS, HEC, HPC, HPMC, MCC, OA, PA, PEG 6000, PVP, SA, TA
39  1999 Surface free energy of ethylcellulose films and the influence of plasticizers. AB, LW
40  1999 Technology to obtain sustained release characteristics of drugs after delivered to the colon. 5-ASA, PCDC
41  1999 The effect of the aqueous solubility of xanthine derivatives on the release mechanism from ethylcellulose matrix tablets. ---
42  2000 Drug release kinetics from polymeric films containing propranolol hydrochloride for transdermal use. PPN, PVP
43  2000 Microencapsulation and characterization of tramadol-resin complexes. SEM, TRC
44  2000 pH-independent release of a weakly basic drug from water-insoluble and -soluble matrix tablets. HPMC
45  2000 The preparation and drug-release behaviour of CTA/EC and PMS/EC composite microcapsules. CTA, PMS, TH
46  2000 [Preparation of tea polyphenols sustained-release microcapsule]. PVA, SDS, TP
47  2001 Calculation of the dimensions of dosage forms with release controlled by diffusion for in vivo use. ATBC, DBS
48  2001 Compression forces and amount of outer coating layer affecting the time-controlled disintegration of the compression-coated tablets prepared by direct compression with micronized ethylcellulose. ---
49  2001 Design and evaluation of microcapsules of diltiazem hydrochloride. DTZ.HCl
50  2001 Encapsulation of antihypertensive drugs in cellulose-based matrix microspheres: characterization and release kinetics of microspheres and tableted microspheres. CA, NFD, VRP
51  2001 Evaluation of an intestinal pressure-controlled colon delivery capsules prepared by a dipping method. FL, HPMCAS, HPMCP, PCDCs
52  2001 In vitro and in vivo evaluation of sustained release chitosan-coated ketoprofen microparticles. Chi-MP, HPC, MS, PEG
53  2001 Microencapsulation of ascorbic acid: effect of process variables on product characteristics. MW, PIB, SEM
54  2001 Micronized ethylcellulose used for designing a directly compressed time-controlled disintegration tablet. ---
55  2001 Preparation and in vitro dissolution of isoniazid from ethylcellulose microcapsules. PIB
56  2001 Retention and transit of intestinal mucoadhesive films in rat small intestine. ---
57  2002 Characterization of ibuprofen as a nontraditional plasticizer of ethyl cellulose. IBP
58  2002 Cyclodextrin conjugate-based controlled release system: repeated- and prolonged-releases of ketoprofen after oral administration in rats. HP-beta-CyD, KP
59  2002 Design, development, physicochemical, and in vitro and in vivo evaluation of transdermal patches containing diclofenac diethylammonium salt. PVP
60  2002 Development of a lag time coating for drug-layered fish feed pellets. HPMC
61  2002 Development of controlled release matrix pellets by annealing with micronized water-insoluble or enteric polymers. CR, HPMCAS, MFT, TEC
62  2002 Effect of nanoparticle encapsulation on the photostability of the sunscreen agent, 2-ethylhexyl-p-methoxycinnamate. PLGA, trans-EHMC
63  2002 Ethyl cellulose and polyethylene glycol-based sustained-release sparfloxacin chip: an alternative therapy for advanced periodontitis. DEPh, PEG
64  2002 Floating microparticles based on low density foam powder. PMMA
65  2002 Gastrointestinal mucoadhesive patch system (GI-MAPS) for oral administration of G-CSF, a model protein. FL, G-CSF, GI-MAPS, PA, WBC
66  2002 In vitro study on capsule formulations of omeprazole containing enteric coated granules. HPMC, IR, SR, TSR, ZES
67  2002 Oral controlled release formulation of diclofenac sodium by microencapsulation with ethyl cellulose. DFS
68  2002 Plasticizer effect and comparative evaluation of cellulose acetate and ethylcellulose-HPMC combination coatings as semipermeable membranes for oral osmotic pumps of naproxen sodium. CA, NPS, OPTs, PG, SPMs
69  2002 Preparation, characterization and in vitro drug release of isosorbide dinitrate microspheres. ISDN
70  2002 Starch acetate--a novel film-forming polymer for pharmaceutical coatings. SA
71  2002 Taste masking of diclofenac sodium using microencapsulation. DEP, DS
72  2002 [In vitro drug release profiles and mucoadhesive property of bioadhesive microspheres of metronidazole]. ---
73  2002 [Preparation of diltiazem hydrochloride delayed-onset, sustained release tablet]. DIL, HPMC, PVP, Tlag
74  2003 Design and evaluation of matrix diffusion controlled transdermal patches of verapamil hydrochloride. E-RS100, ERL100, MA, ML, WVTR
75  2003 Development and in vitro evaluation of diltiazem hydrochloride transdermal patches based on povidone-ethylcellulose matrices. ---
76  2003 Enhanced film-forming properties for ethyl cellulose and starch acetate using n-alkenyl succinic anhydrides as novel plasticizers. n-ASAs, OSA
77  2003 Formulation parameters affecting the performance of coated gelatin capsules with pulsatile release profiles. CAPr, HPMC
78  2003 In vitro--in vivo evaluation of tableted caseinchitosan microspheres containing diltiazem hydrochloride. DTZ.HCL, HPMC, MRT
79  2003 Once-daily sustained-release matrix tablets of nicorandil: formulation and in vitro evaluation. HPMC
80  2003 Preparation of floating alginate gel beads for drug delivery to the gastric mucosa. ALECs, MZ
81  2003 Synthesis and release studies of shikonin-containing microcapsules prepared by the solvent evaporation method. DCM, PEG, PVA, SDS
82  2003 [Preparation of complex chitosan microcapsule and its application in controlled release of vitamin D2]. CS
83  2004 Analysis of the release process of phenylpropanolamine hydrochloride from ethylcellulose matrix granules II. effects of the binder solution on the release process. EtOH, PPA
84  2004 Compositional and moisture content effects on the biodegradability of zein/ethylcellulose films. ---
85  2004 Development of enteric-coated timed-release matrix tablets for colon targeting. HEC, MCC
86  2004 Dual coated erodible microcapsules for modified release of diclofenac sodium. CAP, SGF, SIF
87  2004 Effects of different cellulose derivatives on drug release mechanism studied at a preformulation stage. HPMC, MCC, NMR
88  2004 Formulation design of double-layer in the outer shell of dry-coated tablet to modulate lag time and time-controlled dissolution function: studies on micronized ethylcellulose for dosage form design (VII). ---
89  2004 Glibenclamide transdermal patches: physicochemical, pharmacodynamic, and pharmacokinetic evaluations. ERL, ERS, PVP
90  2004 Hydrophilic excipients modulate the time lag of time-controlled disintegrating press-coated tablets. HPMC, SDL, time lag
91  2004 In vitro and in vivo evaluation of a matrix-in-cylinder system for sustained drug delivery. ---
92  2004 Microspectroscopic FT-IR mapping system as a tool to assess blend homogeneity of drug-excipient mixtures. FTIR
93  2004 Novel and simple preparation method of matrix-type composite particles for controlled drug release by mechanical action. ---
94  2004 Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion. HME
95  2004 Polymer blends used for the aqueous coating of solid dosage forms: importance of the type of plasticizer. DBS, propranolol HCl, TEC
96  2004 The effect of hydrophilic and lipophilic polymers and fillers on the release rate of atenolol from HPMC matrices. HPMC
97  2004 Time- and pH-dependent colon-specific drug delivery for orally administered diclofenac sodium and 5-aminosalicylic acid. 5-ASA, CDDS, DS
98  2005 A comparison between povidone-ethylcellulose and povidone-eudragit transdermal dexamethasone matrix patches based on in vitro skin permeation. FTIR, SEM, TDDS
99  2005 Asymmetric membrane capsules for delivery of poorly water-soluble drugs by osmotic effects. CA, CM, FL, HPMC, NF, SLS
100  2005 Bioadhesive tablets for controlled transdermal delivery of drugs. CF, HPC
101  2005 Development and bioadhesive properties of chitosan-ethylcellulose microspheres for nasal delivery. CM
102  2005 Development of a single unit extended release formulation for ZK 811 752, a weakly basic drug. HPMC
103  2005 Dissolution mechanism of poorly water-soluble drug from extended release solid dispersion system with ethylcellulose and hydroxypropylmethylcellulose. HPMC, IND
104  2005 Guided bone regeneration in the treatment of segmental diaphyseal defects: a comparison between resorbable and non-resorbable membranes. CH
105  2005 In vitro and in vivo studies on mucoadhesive microspheres of amoxicillin. Amo-ad-ms, Amo-Ec-ms, HCl
106  2005 Modulation of Tenoxicam release from hydrophilic matrix: modulator membrane versus rate-controlling membrane. HPMC
107  2005 Novel film modifiers to alter the physical properties of composite ethylcellulose films. DMA, DSC, MW, PVP
108  2005 Preparation and evaluation of verapamil hydrochloride microcapsules. CA
109  2005 Skin permeation of propranolol from polymeric film containing terpene enhancers for transdermal use. DBP, PG, PPL, PVP
110  2005 Spray-dried chitosan/ethylcellulose microspheres for nasal drug delivery: swelling study and evaluation of in vitro drug release properties. ---
111  2005 [Preparation and characterization of ampicillin loaded ethylcellulose nanospheres]. FTIR
112  2006 Application of gold nanoparticles to microencapsulation of thioridazine. ---
113  2006 Bioavailability and in vivo release behavior of controlled-release multiple-unit theophylline dosage forms in beagle dogs, cynomolgus monkeys, and gottingen minipigs. TP
114  2006 Characterization of polymeric dispersions of dimenhydrinate in ethyl cellulose for controlled release. DMH
115  2006 Controlled release calcium silicate based floating granular delivery system of ranitidine hydrochloride. CS, PCG, RH, SCG, SEM
116  2006 Controlled release of saccharides from matrix tablets. NAG, SA
117  2006 Controlled systemic delivery of indomethacin using membrane-moderated, cream formulation-based transdermal devices. CA
118  2006 Development and in vitro evaluation of oral controlled release formulations of celecoxib using optimization techniques. CCX, HPMC
119  2006 Directly compressed mini matrix tablets containing ibuprofen: preparation and evaluation of sustained release. HPMC
120  2006 Effects of ethylcellulose and 2-octyldodecanol additives on skin permeation and irritation with ethylene-vinyl acetate copolymer matrix patches containing formoterol fumarate. EVA, FF, OD
121  2006 In vitro and in vivo degradation of oxidized acetyl- and ethyl-cellulose sponges. AC
122  2006 Investigation of wetting behavior of nonaqueous ethylcellulose gel matrices using dynamic contact angle. IPM
123  2006 Naproxen release from sustained release matrix system and effect of cellulose derivatives. HPMC
124  2006 Preparation and characterization of biodegradable urea-loaded microparticles as an approach for transdermal delivery. CAP
125  2006 Preparation and control-release kinetics of isosorbide dinitrate microspheres. HPC, ISDN
126  2006 Preparation of polymeric submicron particle-containing microparticles using a 4-fluid nozzle spray drier. MAN, PEI, PLGA
127  2006 The influence of different plasticizers and polymers on the mechanical and thermal properties, porosity and drug permeability of free shellac films. DSC, HPMC, MC, PEG, PVA, TEC
128  2006 Theophylline granule formulation prepared by the wet granulation method: comparison of in vitro dissolution profiles and estimation of in vivo plasma concentrations. SA, SR
129  2006 Use of rotary fluidized-bed technology for development of sustained-release plant extracts pellets: potential application for feed additive delivery. ---
130  2006 [The factors influencing metoprolol succinate release from hydroxypropyl methylcellulose matrix tablet]. HPMC, MS
131  2007 Acoustic monitoring of a fluidized bed coating process. PLS, RMSEP
132  2007 Analysis of the release process of phenylpropanolamine hydrochloride from ethylcellulose matrix granules IV.(1)) Evaluation of the controlled release properties for in vivo and in vitro release systems. PPA
133  2007 Correlation between the permeability of metoprolol tartrate through plasticized isolated ethylcellulose/hydroxypropyl methylcellulose films and drug release from reservoir pellets. HPMC
134  2007 Ethyl cellulose-based solid matrix system for sustaining release of naproxen. ---
135  2007 Ethylcellulose formulations for controlled release of the herbicide alachlor in a sandy soil. CF, MEFs
136  2007 Formulation, evaluation, and comparison of bilayered and multilayered mucoadhesive buccal devices of propranolol hydrochloride. CP, PRH, SCMC
137  2007 Mucoadhesive tablet releasing iodine for treating oral infections. DSC, HPC
138  2007 Norflurazon mobility, dissipation, activity, and persistence in a sandy soil as influenced by formulation. CF, MEFs
139  2007 Porous carrier based floating granular delivery system of repaglinide. CP940, CS, GI, GRT, HPMC K4M, RG
140  2007 Preparation and in vitro evaluation of pH, time-based and enzyme-degradable pellets for colonic drug delivery. 5-ASA, CaP, MCC, SEM
141  2007 Spectral characterization of a newly synthesized fluorescent semicarbazone derivative and its usage as a selective fiber optic sensor for copper(II). BNF, PVC
142  2007 Surface characterizations of spin-coated films of ethylcellulose and hydroxypropyl methylcellulose blends. AFM, HPMC, IPA
143  2007 Syntheses, characterization, and in vitro degradation of ethyl cellulose-graft-poly(epsilon-caprolactone)-block-poly(L-lactide) copolymers by sequential ring-opening polymerization. CL, EC-g-PCL, EC-g-PCL-b-PLLA, L-LA, ROP
144  2007 The impact of trimethyl chitosan on in vitro mucoadhesive properties of pectinate beads along different sections of gastrointestinal tract. C934P, PEC, TMC
145  2008 Analysis of the release process of phenylpropanolamine hydrochloride from ethylcellulose matrix granules V. Release properties of ethylcellulose layered matrix granules. ---
146  2008 Characterization of spreadability of nonaqueous ethylcellulose gel matrices using dynamic contact angle. ---
147  2008 Controlled indomethacin release from mucoadhesive film: in vitro and clinical evaluations. ---
148  2008 Controlled release matrix tablets of zidovudine: effect of formulation variables on the in vitro drug release kinetics. CP, CR, HPMC
149  2008 Development and in-vitro evaluation of transdermal matrix films of metoprolol tartrate. DBT, MT, PVP
150  2008 Development of sustained release fast-disintegrating tablets using various polymer-coated ion-exchange resin complexes. FDTs, SEM
151  2008 Drug-polymer interaction and its significance on the physical stability of nifedipine amorphous dispersion in microparticles of an ammonio methacrylate copolymer and ethylcellulose binary blend. H-bonds
152  2008 Effect of various surfactants and their concentration on controlled release of captopril from polymeric matrices. CMC, HPMC
153  2008 In vitro and in vivo evaluation of ranitidine hydrochloride loaded hollow microspheres in rabbits. RH
154  2008 Influence of the functionalization pattern of ethyl cellulose on the interactions with polystyrene latex particles in aqueous mixtures. CMC, EHEC
155  2008 Preparation and evaluation of diltiazem hydrochloride diffusion-controlled transdermal delivery system. DBP, diltiazem HCl, HPMC, IPM, IPP
156  2008 Ratiometric sensing of CO2 in ionic liquid modified ethyl cellulose matrix. HPTS, IL
157  2008 Rumen bypass and biodistribution of l-carnitine from dual-layered coated pellets in cows, in vitro and in vivo. DCP, SCP
158  2008 Spherical crystallization of mebendazole to improve processability. EE/PE, HPC, HPMC, MBZ
159  2009 Alfuzosin hydrochloride transdermal films: evaluation of physicochemical, in vitro human cadaver skin permeation and thermodynamic parameters. PSS, PVP
160  2009 Coated formulations: new insights into the release mechanism and changes in the film properties with a novel release cell. ---
161  2009 Design and evaluation of transdermal drug delivery system for curcumin as an anti-inflammatory drug. CUR, DSC, HPMC K4M, IR, OA
162  2009 Development and evaluation of ethyl cellulose-based transdermal films of furosemide for improved in vitro skin permeation. HPMC
163  2009 Development and evaluation of nefopam transdermal matrix patch system in human volunteers. PVP
164  2009 Evaluation of injection moulding as a pharmaceutical technology to produce matrix tablets. DSC, HPMC, SEM, TGA, X-RD
165  2009 Formulation and characterization of a compacted multiparticulate system for modified release of water-soluble drugs--part 1--acetaminophen. GMS
166  2009 Formulation and characterization of a compacted multiparticulate system for modified release of water-soluble drugs--Part II theophylline and cimetidine. ---
167  2009 Improved properties of incorporated chitosan film with ethyl cellulose microspheres for controlled release. CS
168  2009 Lectin conjugated gastroretentive multiparticulate delivery system of clarithromycin for the effective treatment of Helicobacter pylori. CM, Con A, GI, GRT, H. pylori
169  2009 Microfluidic preparation of monodisperse ethyl cellulose hollow microcapsules with non-toxic solvent. CS, EA
170  2009 Novel cyclodextrin-based film formulation intended for buccal delivery of atenolol. FTIR, HPMC, PVA, RAMEB
171  2009 Novel drug delivery devices for providing linear release profiles fabricated by 3DP. DDDs
172  2009 Preparation and comparative evaluation of sustained release metoclopramide hydrochloride matrix tablets. CMC, HPMC, MCP, SSG
173  2009 Preventing the thermal degradation of astaxanthin through nanoencapsulation. PCPLC
174  2009 Use of spray-dried chitosan acetate and ethylcellulose as compression coats for colonic drug delivery: effect of swelling on triggering in vitro drug release. CSA
175  2010 Characterisation of the thermal properties of ethylcellulose using differential scanning and quasi-isothermal calorimetric approaches. HSM, MTDSC
176  2010 Comparison of release-controlling efficiency of polymeric coating materials using matrix-type casted films and diffusion-controlled coated tablet. HPMC
177  2010 Development of sustained release capsules containing "coated matrix granules of metoprolol tartrate". ---
178  2010 Effect of ethanol on the water permeability of controlled release films composed of ethyl cellulose and hydroxypropyl cellulose. HPC
179  2010 Evaluation and optimization of preparative variables for controlled-release floating microspheres of levodopa/carbidopa. CD, LD
180  2010 Gentamicin-impregnated chitosan/nanohydroxyapatite/ethyl cellulose microspheres granules for chronic osteomyelitis therapy. CS, GM, nHA
181  2010 High loading fragrance encapsulation based on a polymer-blend: preparation and release behavior. HPMC
182  2010 Hydroxyapatite/polyurethane scaffold incorporated with drug-loaded ethyl cellulose microspheres for bone regeneration. HA/PU
183  2010 Mechanistic study on demulsification of water-in-diluted bitumen emulsions by ethylcellulose. ---
184  2010 Optimization of a novel wax matrix system using aminoalkyl methacrylate copolymer E and ethylcellulose to suppress the bitter taste of acetaminophen. AMCE, GM
185  2010 Polymer blends used to prepare nifedipine loaded hollow microspheres for a floating-type oral drug delivery system: in vitro evaluation. PVP
186  2010 Preparation and evaluation of nicotinic acid sustained-release pellets combined with immediate release simvastatin. NA, SIM
187  2010 Preparation of rosiglitazone maleate sustained-release floating microspheres for improved bioavailability. AUC, DL, EE, RM
188  2010 Release kinetic studies of aspirin microcapsules from ethyl cellulose, cellulose acetate phthalate and their mixtures by emulsion solvent evaporation method. CAP
189  2010 Simple preparation of coated resin complexes and their incorporation into fast-disintegrating tablets. ---
190  2010 [Preparation of sustained-release capsules of zaltoprofen]. HPMC, ZP
191  2011 Design and mechanism of on-off pulsed drug release using nonenteric polymeric systems via pH modulation. PAA
192  2011 Development and characterization of skin permeation retardants and enhancers: a comparative study of levothyroxine-loaded PNIPAM, PLA, PLGA and EC microparticles. PLA, PLGA
193  2011 Development and evaluation of injection-molded sustained-release tablets containing ethylcellulose and polyethylene oxide. PEO
194  2011 Dual coating of swellable and rupturable polymers on glipizide loaded MCC pellets for pulsatile delivery: formulation design and in vitro evaluation. HPMC, MCC
195  2011 Environmentally friendly slow-release nitrogen fertilizer. APT, CMC/HEC
196  2011 Ethylcellulose-based matrix-type microspheres: influence of plasticizer RATIO as pore-forming agent. DH, TEC
197  2011 Formulation and in vitro characterization of cefpodoxime proxetil gastroretentive microballoons. DSC, HPMC
198  2011 Formulation development and investigation of domperidone transdermal patches. HPMC, PVA, PVP
199  2011 Increasing the thermal storage capacity of a phase change material by encapsulation: preparation and application in natural rubber. PCM
200  2011 Interplay of formulation and process methodology on the extent of nifedipine molecular dispersion in polymers. SDs
201  2011 Modulation of drug (metoprolol succinate) release by inclusion of hydrophobic polymer in hydrophilic matrix. DCP, HPMC, MS, SR
202  2011 Mucoadhesive curcumin nanospheres: biological activity, adhesion to stomach mucosa and release of curcumin into the circulation. C-EC, C-ECMC, GIT, MC
203  2011 Novel polymorphic form of adefovir dipivoxil derived from polymer-directed crystallization. AD, PAA
204  2011 Optimization of In - vitro Permeation Pattern of Ketorolac Tromethamine Transdermal Patches. FTIR, PVP, SEM
205  2011 Polymer leaching from film coating: effects on the coating transport properties. HPC
206  2011 Preparation and characterization of the foam-stabilizing properties of cellulose-ethyl cellulose complexes for use in foods. ---
207  2011 Preparation and Determination of Drug-Polymer Interaction and In-vitro Release of Mefenamic Acid Microspheres Made of CelluloseAcetate Phthalate and/or Ethylcellulose Polymers. CAP, DSC, MA, MESE, SEM, SLS, XRD
208  2011 Preparation and evaluation of mixture of eudragit and ethylcellulose microparticles loaded with ranolazine for controlled release. DSC, EU, FT-IR, SEM
209  2011 Preparation and in vitro evaluation of mebeverine HCl colon-targeted drug delivery system. ---
210  2011 Retinyl acetate-loaded nanoparticles: dermal penetration and release of the retinyl acetate. NP, RA
211  2011 Sustained release of amoxicillin from ethyl cellulose-coated amoxicillin/chitosan-cyclodextrin-based tablets. CD, CS
212  2011 Sustained-release and swelling characteristics of xanthan gum/ethylcellulose-based injection moulded matrix tablets: in vitro and in vivo evaluation. MPT, XG
213  2011 Synthesis and characterization of biodegradable microcapsules for the controlled delivery of calcium hydroxide. PLA
214  2012 Comparison of microencapsulation by emulsion-solvent extraction/evaporation technique using derivatives cellulose and acrylate-methacrylate copolymer as carriers. CAB, TH
215  2012 Design and evaluation of patches for transdermal delivery of losartan potassium. PVA, PVP
216  2012 Development and Evaluation of Carbon Nanotubes Doped Sustained Release Microspheres of Metoprolol Tartrate. EE, MT, MWCNTs
217  2012 Development of a novel and customizable two-solution mixing type spray nozzle for one-step preparation of nanoparticle-containing microparticles. MAN
218  2012 Effect of protein release rates from tablet formulations on the immune response after sublingual immunization. ER, MCC, OVA
219  2012 Ethylcellulose microparticles: a review. ---
220  2012 Eudraginated polymer blends: a potential oral controlled drug delivery system for theophylline. EUD, GI, SCMC, SGF, SIF, SR, TPH
221  2012 Floating microspheres of valacyclovir HCl: Formulation, optimization, characterization, in vitro and in vivo floatability studies. VCH
222  2012 In vitro and in vivo evaluation of novel osmotic pump tablets of isosorbide-5-mononitrate containing polyvinyl pyrrolidone (PVP) for controlled release. 5-ISMN, CA, PVP
223  2012 Investigation of a novel 3-fluid nozzle spray drying technology for the engineering of multifunctional layered microparticles. DFS, FFR, MPs, TSC
224  2012 Low molecular mass chitosan as carrier for a hydrodynamically balanced system for sustained delivery of ciprofloxacin hydrochloride. CP, HBS, LMCH, XG
225  2012 Optimization and prediction of drug release from matrix tablets using response surface methodology and near infrared chemical imaging. NIR-CI, PEO, RSM
226  2012 Polymer coating of carrier excipients modify aerosol performance of adhered drugs used in dry powder inhalation therapy. SS
227  2012 Protective effects of polysaccharides and polyhydric alcohols in a dry mouth model in cultured cells. HPMC, MC
228  2012 Study of drug release and tablet characteristics of silicone adhesive matrix tablets. PSA
229  2012 Study of pharmaceutical coatings by means of NMR cryoporometry and SEM image analysis. HPC, NMR, PSD, SEM
230  2012 The development of thermal nanoprobe methods as a means of characterizing and mapping plasticizer incorporation into ethylcellulose films. AFM, DMA, FCO, MTDSC
231  2012 Thermo-responsive monodisperse core-shell microspheres with PNIPAM core and biocompatible porous ethyl cellulose shell embedded with PNIPAM gates. FTIR, PNIPAM, RDB, SEM, VPTT
232  2012 Using ion-selective electrodes to study the drug release from porous cellulose matrices. HPC, PVC, SC-ISEs
233  2012 [Preparation of ibuprofen/EC-PVP sustained-release composite particles by supercritical CO2 anti-solvent technology]. DSC, IR
234  2013 A novel high mechanical strength shape memory polymer based on ethyl cellulose and polycaprolactone. PCL, SMP
235  2013 A novel multilayered multidisk oral tablet for chronotherapeutic drug delivery. HEC, HPMC, MLMDT, PBL
236  2013 An innovative matrix controlling drug delivery produced by thermal treatment of DC tablets containing polycarbophil and ethylcellulose. DC, POL
237  2013 Characterization of ethyl cellulose polymer. ---
238  2013 Continuous generation of ethyl cellulose drug delivery nanocarriers from microbubbles. ---
239  2013 Design and characterization of enteric-coated controlled release mucoadhesive microcapsules of Rabeprazole sodium. ANOVA, BBD
240  2013 Effect of the manufacturing conditions on the structure and permeability of polymer films intended for coating undergoing phase separation. HPC
241  2013 Effects of molecular weight on permeability and microstructure of mixed ethyl-hydroxypropyl-cellulose films. HPC
242  2013 Ethyl cellulose and hydroxypropyl methyl cellulose buoyant microspheres of metoprolol succinate: Influence of pH modifiers. AA, CA, FA, HPMC, MS, TA
243  2013 Evaluation of matrix type mucoadhesive tablets containing indomethacin for buccal application. IMC, NSAIDs, PEG
244  2013 Fractionation of ethylcellulose oleogels during setting. ---
245  2013 Influence of polymer blends on the characterization of gliclazide--encapsulated into poly (epsilon-caprolactone) microparticles. ERS, GLZ, PCL, SEM
246  2013 Mucoadhesive intestinal devices for oral delivery of salmon calcitonin. sCT
247  2013 Mucosa-plate for direct evaluation of mucoadhesion of drug carriers. ALG, EC/MC, NS-chitosan
248  2013 New insights on how to adjust the release profile from coated pellets by varying the molecular weight of ethyl cellulose in the coating film. De, HPC, MW
249  2013 Pentoxifylline Loaded Floating Microballoons: Design, Development and Characterization. ---
250  2013 Preparation, in vitro and in vivo evaluation of budesonide loaded core/shell nanofibers as oral colonic drug delivery system. BUD, GI, OCDDS
251  2013 Sensing and imaging of oxygen with parts per billion limits of detection and based on the quenching of the delayed fluorescence of (13)C70 fullerene in polymer hosts. PS, RLD
252  2013 Ultra low concentration deltamethrin loaded patch development and evaluation of its repellency against dengue vector Aedes (S) albopictus. DBT, PVP
253  2014 "Green" films from renewable resources: properties of epoxidized soybean oil plasticized ethyl cellulose films. DBP, ESO, TEC
254  2014 A pharmacokinetic comparison of adult and paediatric formulations of raltegravir in healthy adults. AEs, GFS
255  2014 Characterizations of plasticized polymeric film coatings for preparing multiple-unit floating drug delivery systems (muFDDSs) with controlled-release characteristics. DEP, muFDDSs, TEC, TPF
256  2014 Conceptuation, formulation and evaluation of sustained release floating tablets of captopril compression coated with gastric dispersible hydrochlorothiazide using 2(3) factorial design. HCTZ
257  2014 Design, characterization and in-vitro evaluation of different cellulosic acrylic and methacrylic polymers loaded aceclofenac microspheres. FTIR, KSR
258  2014 Development of a dosage form for accelerated release. ---
259  2014 Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach. CQA, DoE, HME, NIR, PAT, PCA, PMOL, QbD
260  2014 Effects of polyvinylpyrrolidone both as a binder and pore-former on the release of sparingly water-soluble topiramate from ethylcellulose coated pellets. PVP
261  2014 Ethyl cellulose nanoparticles: clarithomycin encapsulation and eradication of H. pylori. ---
262  2014 Ethylcellulose-coated polyolefin separators for lithium-ion batteries with improved safety performance. PE
263  2014 Evaluation of novel immediate-/controlled-release tablets of isosorbide-5-mononitrate (5-ISMN): in vitro-in vivo correlation. 5-ISMN, CA, ICR, IVIVC, PEG, SPM
264  2014 Formulation and characterizations of delayed release multi particulates system of indomethacin: optimization by response surface methodology. NSAID, RSM
265  2014 Formulation and Evaluation of In-vitro Characterization of Gastic-Mucoadhesive Microparticles/Discs Containing Metformin Hydrochloride. ---
266  2014 Formulation of gammaoryzanol-loaded nanoparticles for potential application in fortifying food products. DSC, XRD
267  2014 Higher quality quercetin sustained release ethyl cellulose nanofibers fabricated using a spinneret with a Teflon nozzle. ---
268  2014 In vitro evaluation of transdermal patches of flurbiprofen with ethyl cellulose. DBP, EtOH, IPM, PG, SLS
269  2014 Influence of sheath solvents on the quality of ethyl cellulose nanofibers in a coaxial electrospinning process. DMF
270  2014 Microencapsulation of seed-coating tebuconazole and its effects on physiology and biochemistry of maize seedlings. ABA
271  2014 Novel method for visualizing water transport through phase-separated polymer films. HPC
272  2014 One-step process for the synthesis and deposition of anatase, two-dimensional, disk-shaped TiO₂ for dye-sensitized solar cells. DS-TiO2, NC, PEBII, qssDSSCs, THF, TTIP
273  2014 Polyethylenimine facilitated ethyl cellulose for hexavalent chromium removal with a wide pH range. PEI
274  2014 Polymer encapsulation of amoxicillin microparticles by SAS process. AMC, DCM, SAS, SEM, XPS
275  2014 Preparation and characterization of laminated thiolated chitosan-based freeze-dried wafers for potential buccal delivery of macromolecules. CD, CS, FTIR, SEM
276  2014 Silicone adhesive matrix of verapamil hydrochloride to provide pH-independent sustained release. PSA
277  2014 Three levels face centered central composite design of colon targeted micro-particulates system of celecoxib: screening of formulations variables and in vivo studies. NSAID, RSM
278  2014 Tunable biphasic drug release from ethyl cellulose nanofibers fabricated using a modified coaxial electrospinning process. PVC
279  2014 Unfolding type gastroretentive film of Cinnarizine based on ethyl cellulose and hydroxypropylmethyl cellulose. CNZ, DSC, SEM
280  2015 A solid-state NMR method to determine domain sizes in multi-component polymer formulations. HPC
281  2015 Chlorhexidine-releasing orthodontic elastomerics. CHX, SEM
282  2015 Development and Evaluation of Thymol Microparticles Using Cellulose Derivatives as Controlled Release Dosage form. DSC, FTIR, HPMC, SEM
283  2015 Effect of ethylcellulose and propylene glycol on the controlled-release performance of glyceryl monooleate-mertronidazole periodontal gel. GMO, PG
284  2015 Effects of Ionic Strength on the Colloidal Stability and Interfacial Assembly of Hydrophobic Ethyl Cellulose Nanoparticles. ---
285  2015 Effects of the addition of dimer acid alkyl esters on the properties of ethyl cellulose. DA
286  2015 Essential oil based polymeric patch development and evaluating its repellent activity against mosquitoes. ---
287  2015 Ethyl Cellulose and Cetrimonium Bromide Assisted Synthesis of Mesoporous, Hexagon Shaped ZnO Nanodisks with Exposed {0001} Polar Facets for Enhanced Photovoltaic Performance in Quantum Dot Sensitized Solar Cells. BET, EIS, FESEM, NPs, NRs, NSs, PL, PXRD, QDs, TEM, ZnO NDs
288  2015 Ethylcellulose nanoparticles with bimodal size distribution as precursors for the production of very small nanoparticles. ESE, NPs, SPF
289  2015 Evaluation of biodegradable polymers as encapsulating agents for the development of a urea controlled-release fertilizer using biochar as support material. CA, CRFs, SA
290  2015 Exploring the drug migration process through ethyl cellulose-based films from infrared-spectral insights. ---
291  2015 Fabrication of porous ethyl cellulose microspheres based on the acetone-glycerin-water ternary system: Controlling porosity via the solvent-removal mode. O/W
292  2015 In-vitro and in-vivo evaluation of repaglinide loaded floating microspheres prepared from different viscosity grades of HPMC polymer. HPMC
293  2015 Mechanical and adhesive properties of cellulosic film coats containing polymeric additives. CS, HPMC, MS
294  2015 Model drug as pore former for controlled release of water-soluble metoprolol succinate from ethylcellulose-coated pellets without lag phase: opportunities and challenges. HPC, MS
295  2015 Nanofibers Fabricated Using Triaxial Electrospinning as Zero Order Drug Delivery Systems. KET
296  2015 Novel ethylcellulose-coated pellets for controlled release of metoprolol succinate without lag phase: characterization, optimization and in vivo evaluation. MS
297  2015 Optical sensors for the detection of trace chloroform. ---
298  2015 Oxygen and relative humidity monitoring with films tailored for enhanced photoluminescence. OLEDs, PEG, PL, PS, PtOEP, RH, S/N
299  2015 Poly(3-hydroxybutyrate)-ethyl cellulose based bio-composites with novel characteristics for infection free wound healing application. FA, HBA
300  2015 Solvent exchange-induced in situ forming gel comprising ethyl cellulose-antimicrobial drugs. NMP
301  2015 Surelease or organic solution of ethylcellulose in preparation of sustained release theophylline micromatrices or matrices using spray drying technique. DSC, IR, SD
302  2015 Synthesis of Surface-Responsive Composite Particles by Dehydration of Water-in-Oil Emulsions. CMC
303  2015 The effects of screw configuration and polymeric carriers on hot-melt extruded taste-masked formulations incorporated into orally disintegrating tablets. HME, ODTs, SC
304  2015 The role of surfactants on ethylcellulose oleogel structure and mechanical properties. ---
305  2016 A study on the solid state characteristics of spray-congealed glyceryl dibehenate solid lipid microparticles containing ibuprofen. GB, IBU, SLMs
306  2016 Characterization of pore structure of polymer blended films used for controlled drug release. HPC
307  2016 Coaxially electrospun fiber-based microbicides facilitate broadly tunable release of maraviroc. PVP
308  2016 Design of experiment approach for formulating multi-unit colon-targeted drug delivery system: in vitro and in vivo studies. DoE, MTZ
309  2016 Development, Characterization, and Utilization of Food-Grade Polymer Oleogels. ---
310  2016 Effect of polydimethylsiloxane and ethylcellulose on in vitro permeation of centchroman from its transdermal patches. FTIR, PDMS, TS, WVTR
311  2016 Effects of ethyl cellulose on the crystallization and mechanical properties of poly(beta-hydroxybutyrate). PHB
312  2016 Effects of Operating Temperature on Droplet Casting of Flexible Polymer/Multi-Walled Carbon Nanotube Composite Gas Sensors. MWCNT, PEO, PVP, SEM, VOC
313  2016 Effects of Organogel Hardness and Formulation on Acceptance of Frankfurters. BF, CO, OG-I, SMS
314  2016 Electrospun Poly(N-isopropylacrylamide)/Ethyl Cellulose Nanofibers as Thermoresponsive Drug Delivery Systems. KET, PNIPAAm
315  2016 Engineering chemically exfoliated dispersions of two-dimensional graphite and molybdenum disulphide for ink-jet printing. DMA, DMF, IPA, NMP, PET
316  2016 Formulation and Evaluation of Morin-Loaded Solid Lipid Nanoparticles. AUC0-360, PVA, SLN
317  2016 Formulation and optimization of floating matrix tablets of clarithromycin using simplex lattice design. HPMC, MDT
318  2016 Influence of solvent quality on the mechanical strength of ethylcellulose oleogels. ---
319  2016 Investigating critical effects of variegated lubricants, glidants and hydrophilic additives on lag time of press coated ethylcellulose tablets. ---
320  2016 Investigating effects of hydroxypropyl methylcellulose (HPMC) molecular weight grades on lag time of press-coated ethylcellulose tablets. HPMC, MW
321  2016 Medicated Janus fibers fabricated using a Teflon-coated side-by-side spinneret. PVP
322  2016 Novel Polymeric Nanoparticles Intended for Ophthalmic Administration of Acetazolamide. AZM, IOP, NCs
323  2016 Photostability and Moisture Stability of CH3 NH3 PbI3 -based Solar Cells by Ethyl Cellulose. NMR, PCE, RH
324  2016 Physical stability and rheological properties of konjac glucomannan-ethyl cellulose mixed emulsions. KGM
325  2016 Polyoxy-Derivatized Perylenediimide as Selective Fluorescent Ag (I) Chemosensor. DCM, DMF, THF
326  2016 Potential use of organogels to replace animal fat in comminuted meat products. BF, SMS
327  2016 Preparation and characterization of slow-release fertilizer encapsulated by starch-based superabsorbent polymer. starch-SAP
328  2016 Preparation and In Vitro-In Vivo Evaluation of Sustained-Release Matrix Pellets of Capsaicin to Enhance the Oral Bioavailability. DSC, IVIVC, MCC, SEM, XRD
329  2016 Preparation of extended release solid dispersion formulations of tacrolimus using ethylcellulose and hydroxypropylmethylcellulose by solvent evaporation method. ERG, HPMC, IR
330  2016 Preparation, Characterization and in vivo Evaluation of Simple Monolithic Ethylcellulose-coated Pellets Containing Topiramate with Biphasic Release Characteristics. PVP, TPM
331  2016 Propylene/propane permeation properties of ethyl cellulose (EC) mixed matrix membranes fabricated by incorporation of nanoporous graphene nanosheets. MMMs, TEM, XPS
332  2016 Quality effects of using organogels in breakfast sausage. SMS
333  2016 The in vitro and in vivo effects of a fast-dissolving mucoadhesive bi-layered strip as topical anesthetics. HPMC, PVP
334  2016 The influence of the molecular weight of the water-soluble polymer on phase-separated films for controlled release. HPC, MW
335  2016 Vegetable organogels incorporation in cream cheese products. OCC, RBW
336  2017 A thermosensitive drug delivery system prepared by blend electrospinning. KET, PDEGMA
337  2017 Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants. FDM, HME, PBS, PCL, PLLA
338  2017 Design and In Vitro/In Vivo Evaluation of Ultra-Thin Mucoadhesive Buccal Film Containing Fluticasone Propionate. DSC, HPMC, SCMC, XRD
339  2017 Determination of mole fractions of ethyl-cellulose-containing monomers by NMR. AGUs, DS
340  2017 Determination of the release mechanism of Theophylline from pellets coated with Surelease-A water dispersion of ethyl cellulose. ---
341  2017 Development and characterization of ricinoleic acid-based sulfhydryl thiol and ethyl cellulose blended membranes. ---
342  2017 Development of extended-release solid dispersion granules of tacrolimus: evaluation of release mechanism and human oral bioavailability. ERG, HPMC
343  2017 Dynamics of ethyl cellulose nanoparticle self-assembly at the interface of a nematic liquid crystal droplet. LC
344  2017 Effect of Polymers on the Physicochemical Properties and Biological Performance of Fenoprofen Calcium Dihydrate-Triacetyl-beta-Cyclodextrin Complex. FCD, HPMC
345  2017 Effect of Variation in Viscosity Grade of Ethycellulose on Theophylline Microcapsule Properties Prepared by Emulsion Solvent Evaporation. DSC, XRD
346  2017 Effects of the physical-form and the degree-of-saturation of oil on postprandial plasma triglycerides, glycemia and appetite of healthy Chinese adults. NEFA
347  2017 Environmental-friendly and magnetic/silanized ethyl cellulose sponges as effective and recyclable oil-absorption materials. MSEC
348  2017 Ethyl cellulose nanodispersions as stabilizers for oil in water Pickering emulsions. XG
349  2017 Ethyl Cellulose Nanoparticles at the Alkane-Water Interface and the Making of Pickering Emulsions. CCC, IFT
350  2017 Ethylcellulose Colloids Incubated in Dilute Solution. eta, eta, THF, TPIB
351  2017 Ethylcellulose oleogels for lipophilic bioactive delivery - effect of oleogelation on in vitro bioaccessibility and stability of beta-carotene. BC
352  2017 Evaluation of ethylcellulose and its pseudolatex (Surelease) in preparation of matrix pellets of theophylline using extrusion-spheronization. MCC
353  2017 Improving the efficacy of chlorhexidine-releasing elastomerics using a layer-by-layer coating technique. CHX, DCM
354  2017 Influencing the crystallization behavior of binary mixtures of stearyl alcohol and stearic acid (SOSA) using ethylcellulose. SOSA
355  2017 Investigation of a new pH-responsive nanoparticulate pore former for controlled release enteric coating with improved processability and stability. TPNs
356  2017 Morphology and mechanical properties of poly(beta-hydroxybutyrate)/poly(epsilon-caprolactone) blends controlled with cellulosic particles. MCC, PCL, PHB
357  2017 Mucoadhesive amorphous solid dispersions for sustained release of poorly water soluble drugs. ---
358  2017 Nonionic surfactant structure on the drug release, formulation and physical properties of ethylcellulose microspheres. CHLB, HLBs, TH
359  2017 Optical sensor for dual sensing of oxygen and carbon dioxide based on sensing films coated on filter paper. PtTFPP
360  2017 Protein Corona Formation on Colloidal Polymeric Nanoparticles and Polymeric Nanogels: Impact on Cellular Uptake, Toxicity, Immunogenicity, and Drug Release Properties. CMS, dPG, EGRS, NGs, NPs
361  2017 Quality by Design Empowered Development and Optimisation of Time-Controlled Pulsatile Release Platform Formulation Employing Compression Coating Technology. API, CCT, DoE, PR
362  2017 Rapid synthesis of ethyl cellulose supported platinum nanoparticles for the non-enzymatic determination of H2O2. GCE, PtNPs
363  2017 Rheological Characterization of Ethylcellulose-Based Melts for Pharmaceutical Applications. muIM
364  2017 Studies on performance evaluation of a green plasticizer made by enzymatic esterification of furfuryl alcohol and castor oil fatty acid. COFA, DBP, FA
365  2017 Sustainable thermoplastic elastomers derived from cellulose, fatty acid and furfural via ATRP and click chemistry. TPEs
366  2017 Synthesis of a fluorescent ethyl cellulose membrane with application in monitoring 1-naphthylacetic acid from controlled release formula. FNE, IPDI, NAA
367  2017 The importance of the molecular weight of ethyl cellulose on the properties of aqueous-based controlled release coatings. ---
368  2018 A Deformable and Highly Robust Ethyl Cellulose Transparent Conductor with a Scalable Silver Nanowires Bundle Micromesh. ITO, TCs
369  2018 Antimicrobial, antioxidant, and waterproof RTV silicone-ethyl cellulose composites containing clove essential oil. PDMS
370  2018 Application of quasi-emulsification and modified double emulsification techniques for formulation of tacrolimus microsponges. TCM, XG
371  2018 Assessment of hot-processability and performance of ethylcellulose-based materials for injection-molded prolonged-release systems: An investigational approach. ---
372  2018 Cellulose-based click-scaffolds: Synthesis, characterization and biofabrications. ---
373  2018 Chronotherapeutic Drug Delivery of Ketoprofen and Ibuprofen for Improved Treatment of Early Morning Stiffness in Arthritis Using Hot-Melt Extrusion Technology. CTDDS, ES100, HME, IBU, KTP
374  2018 Design and biological response of doxycycline loaded chitosan microparticles for periodontal disease treatment. CS, DDS, DOXY, LMw and MMw
375  2018 Dual temperature and pH responsive nanofiber formulations prepared by electrospinning. KET, PNVCL
376  2018 Effect of lipid and cellulose based matrix former on the release of highly soluble drug from extruded/spheronized, sintered and compacted pellets. CW, E-S, ER, GMS, HPMC, IR, RSM
377  2018 Ethylcellulose Oleogels: Structure, Functionality, and Food Applications. ---
378  2018 Experimental and molecular modeling approach to optimize suitable polymers for fabrication of stable fluticasone nanoparticles with enhanced dissolution and antimicrobial activity. EUD, FLU, FTIR, HPMC
379  2018 Exploring Peyer's Patch Uptake as a Strategy for Targeted Lung Delivery of Polymeric Rifampicin Nanoparticles. GzNP
380  2018 Fabrication of UV-absorbent cellulose-rosin based thermoplastic elastomer via "graft from" ATRP. PBA
381  2018 Flexible gas sensor based on graphene/ethyl cellulose nanocomposite with ultra-low strain response for volatile organic compounds rapid detection. VOCs
382  2018 Formulation and in vivo pharmacokinetic evaluation of ethyl cellulose-coated sustained release multiple-unit system of tacrolimus. SR
383  2018 In vitro and in vivo evaluation of curcumin loaded hollow microspheres prepared with ethyl cellulose and citric acid. CA, CUR, SEM
384  2018 Laccase from Aspergillus niger: A novel tool to graft multifunctional materials of interests and their characterization. ABTS, FT-IR, XRD
385  2018 Lignin and ethylcellulose in controlled release formulations to reduce leaching of chloridazon and metribuzin in light-textured soils. CRFs, DBS
386  2018 New insights on the influence of manufacturing conditions and molecular weight on phase-separated films intended for controlled release. HPC, MW
387  2018 Peculiar effect of polyethylene glycol in comparison with triethyl citrate or diethyl phthalate on properties of ethyl cellulose microcapsules containing propranolol hydrochloride in process of emulsion-solvent evaporation. ---
388  2018 Polymer blends used to develop felodipine-loaded hollow microspheres for improved oral bioavailability. FD, PVP
389  2018 Preparation and Characterization of DOPO-ITA Modified Ethyl Cellulose and Its Application in Phenolic Foams. CPFs, DIMEC, DOPO, FT-IR, ITA
390  2018 Preparation and Pharmacokinetics Evaluation of Solid Self-Microemulsifying Drug Delivery System (S-SMEDDS) of Osthole. L-SMEDDS, S-SMEDDS
391  2018 Preparation, Characterization and In Vitro / In Vivo Evaluation of Oral Time-Controlled Release Etodolac Pellets. ---
392  2018 Preparation, Characterization and Pharmacokinetics Evaluation of the Compound Capsules of Ibuprofen Enteric-Coated Sustained-Release Pellets and Codeine Phosphate Immediate-Release Pellets. CP-IRPs, HPMCP, IB-SRPs, TEC
393  2018 PVP VA64 as a novel release-modifier for sustained-release mini-matrices prepared via hot melt extrusion. HME, QF
394  2018 Sustained-release multiparticulates for oral delivery of a novel peptidic ghrelin agonist: Formulation design and in vitro characterization. BARDS, MA
395  2018 Synthesis of soluble oligsiloxane-end-capped hyperbranched polyazomethine and their application to CO2/N2 separation membranes. PS
396  2018 Tailoring supersaturation from amorphous solid dispersions. ASD, CA, CAP, DSC, EUD, HPMC, HPMCAS, HPMCP, IR
397  2018 Using Ethylcellulose to Structure Oil Droplets in Ice Cream Made with High Oleic Sunflower Oil. HOSO
398  2019 A highly luminescent quantum dot/mesoporous TiO2 nanocomplex film under controlled energy transfer. PL
399  2019 Affinity of Serum Albumin and Fibrinogen to Cellulose, Its Hydrophobic Derivatives and Blends. AFM, BSA, CA, CE, QCM-D
400  2019 An Effective Optical Dual Gas Sensor for Simultaneous Detection of Oxygen and Ammonia. CA
401  2019 Corrosion Features of the Reinforcing Bar in Concrete with Intelligent OH- Regulation of Microcapsules. CaO, XCT
402  2019 Development of behenic acid-ethyl cellulose oleogel stabilized Pickering emulsions as low calorie fat replacer. BA, PDI, SFC
403  2019 Development of Novel Shortenings Structured by Ethylcellulose Oleogels. TMS
404  2019 Effect of Ethylcellulose on the Rheology and Mechanical Heterogeneity of Asphaltene Films at the Oil-Water Interface. ---
405  2019 Encapsulation of babchi essential oil into microsponges: Physicochemical properties, cytotoxic evaluation and anti-microbial activity. BEO, DCM, PVA
406  2019 Engineering rheological properties of edible oleogels with ethylcellulose and lecithin. lard
407  2019 Ethylcellulose assisted exfoliation of graphite by the ultrasound emulsification: An application in electrochemical acebutolol sensor. ACE, ECPG, PG
408  2019 Ethylcellulose in Organic Solution or Aqueous Dispersion Form in Designing Taste-Masked Microparticles by the Spray Drying Technique with a Model Bitter Drug: Rupatadine Fumarate. RUP
409  2019 Extremely Low-Cost and Green Cellulose Passivating Perovskites for Stable and High-Performance Solar Cells. ---
410  2019 Fabrication and physicochemical and antibacterial properties of ethyl cellulose-structured cinnamon oil oleogel: relation between ethyl cellulose viscosity and oleogel performance. CEO, E. coli, S. aureus
411  2019 Formulation of Ethyl Cellulose Microparticles Incorporated Pheophytin A Isolated from Suaeda vermiculata for Antioxidant and Cytotoxic Activities. NO, Pheo a, RP, SOD
412  2019 Fully Printed Zinc Oxide Electrolyte-Gated Transistors on Paper. EGTs, ZnO
413  2019 High-dose coenzyme Q10-loaded oleogels for oral therapeutic supplementation. CoQ10, MCT
414  2019 Polymer Distribution and Mechanism Conversion in Multiple Media of Phase-Separated Controlled-Release Film-Coating. HPC, SEM
415  2019 Preparing of aspirin sustained-release granules by hot-melt granulation and micro-crystal coating. ASP
416  2019 Real time MRI to elucidate the functionality of coating films intended for modified release. HPC
417  2019 Release Adjustment of Two Drugs with Different Solubility Combined in a Matrix Tablet. HPMC
418  2019 Self-Micro-Emulsifying Controlled Release of Eugenol Pellets: Preparation, In vitro/In vivo Investigation in Beagle Dogs. DLS, eugenol-SMEDDS-SR pellets, HPMC, MCC, PDI, SEM, TEM, Z-potential
419  2019 Silica-Polymer Composites as the Novel Antibiotic Delivery Systems for Bone Tissue Infection. CIP, DSC, FTIR, PDMS, SEM/EDX, TGA, XRD
420  2019 Studying the factors that impact the dissolution characteristic of complex drug product. ---
421  2019 Swelling of Zein Matrix Tablets Benchmarked against HPMC and Ethylcellulose: Challenging the Matrix Performance by the Addition of Co-Excipients. DCP, HPMC, MCC, PVP, SLS
422  2019 The effect of collection substrate on electrospun ciprofloxacin-loaded poly(vinylpyrrolidone) and ethyl cellulose nanofibers as potential wound dressing materials. CIF, PVP
423  2019 The Effect of Polydimethylsiloxane-Ethylcellulose Coating Blends on the Surface Characterization and Drug Release of Ciprofloxacin-Loaded Mesoporous Silica. DSC, SEM, XRD
424  2019 Tunable drug release from blend poly(vinyl pyrrolidone)-ethyl cellulose nanofibers. NAP, PVP
425  2019 Understanding factors governing distribution volume of ethyl cellulose-ethanol to optimize ablative therapy in the liver. ---
426  2019 Understanding the release performance of pellets with hydrophobic inclusions in sustained-release coating. HCO
427  2020 A Heat-Resistant Poly(oxyphenylene benzimidazole)/Ethyl Cellulose Blended Polymer Membrane for Highly Safe Lithium-Ion Batteries. PBI, PE
428  2020 Characterization of thermo-oxidative behavior of ethylcellulose oleogels. ---
429  2020 Determinants of zero-order release kinetics from acetaminophen-layered Suglet pellets, Wurster-coated with plasticized Aquacoat ECD (ethyl cellulose dispersion). ECD, TA, TEC, Tg
430  2020 Development and Characterization of PCL Electrospun Membrane-Coated Bletilla striata Polysaccharide-Based Gastroretentive Drug Delivery System. LFH, PCL
431  2020 Electrospinning of zein-ethyl cellulose hybrid nanofibers with improved water resistance for food preservation. CEO
432  2020 Novel Gastroretentive Floating Pulsatile Drug Delivery System Produced via Hot-Melt Extrusion and Fused Deposition Modeling 3D Printing. FDM, HPC
433  2020 Usage of thiocyanate-based ionic liquid as new optical sensor reagent: Absorption and emission based selective determination of Fe (III) ions. LOD